Heat-treated safety glass, about four times stronger than annealed float glass, with polished edges and precise hole positions. Used for doors, façades, shower enclosures and furniture.
| Max size | 3300 × 7000 mm |
| Thickness | 4–19 mm |
| Standard | GB 15763.2 / EN 12150 |
Custom sizes, coatings and edge work are available on request. Send your drawings or cut list and we will quote.
Double and triple glazed units assembled with aluminium or warm-edge spacers, desiccant and dual sealing. Delivered with Low-E or solar-control coatings for thermal performance.
Two or more glass sheets bonded with PVB or SGP interlayers. It stays in the frame when broken — for overhead glazing, balustrades, shopfronts and other safety-critical locations.
Soft-coat and hard-coat low-emissivity glass together with reflective solar-control coatings. Cut, tempered and insulated in-house for energy-efficient façades.
Silk-screen printed ceramic frit fired into the glass surface. Permanent colour and patterns for spandrels, balustrades and decorative façades — not a film that can peel.
Special tempered and laminated assemblies tested for fire resistance, used in stairwells, fire doors and partition walls where building codes demand it.
Low-iron ultra-clear glass with a very slight green tint for high-transparency façades, counters and furniture, plus standard clear float cut to size.
Silver and aluminium mirrors with a protective back coating, plus back-painted glass panels for splashbacks, wall cladding and furniture.